Description

The Homesaver Chimney Protector Multi-Flue Cap is made for those times when the 8” screen height is not enough to give you the proper clearance from flue to lid. The Chimney Protector comes in 10”, 12” screen heights. This allows you to get the minimum 5” clearance between the tile and the cap lid.

The Chimney Protector is the most popular option in Homesaver’s 304 alloy stainless steel multi-flue caps. Even the 3/4” mesh is made of 304 alloy stainless steel.

The Chimney Protector comes as a knock down cap. It is easily assembled. Install the pins through the hinged corners and fasten the lid to the screen with the provided bolts. Your cap will be assembled in minutes. These knockdown features also make for easy shipping.

Each  Chimney Protector has the added advantage of Homesaver’s Swing Tabs. These swing tabs make mounting to any crown a cinch. These Swing Tabs allow for an inside/outside mount and an easy installation to uneven crowns.

The Chimney Protector with the 10” screen height come in 14 standard sizes and the 12” screen height in 6 standard sizes.

Each Homesaver Chimney Protector Multi-Flue Cap comes with a Lifetime Warranty on Workmanship and Materials.

Sizing Your Chimney Protector Multi-Flue Cap

You must be sure to properly size your Multi-Flue cap before ordering. You will need to do the following:

1.Measure the Length of your chimney top and subtract 4 inches (This will be the maximum length of your cap)

2.Measure the width of your chimney top and subtract 4 inches (This will be the maximum width of your cap)

3. From the area your cap will be sitting, Measure the height of any flue liners. Add 5 inches to that height. This will be the minimum screen height that you can use.

4. Once you have gotten your measurements, simply find the size of  Chimney Protector Multi-Flue Cap that will suit your needs and place your order.